3T Car Scissor Jack, Automatic Emergency Crank Lift Stand for SUVs

Product Overview

The 3T car scissor jack, automatic emergency crank lift stand for SUV vehicles is a workshop product for professional use in garages, workshops, and vehicle service.

Key Features

• Set version with multiple components

Technical Data & Product Details

Product Details

• 3T Car Scissor Jack, Automatic Emergency Crank Lift Stand for SUV Vehicles
• Product descriptions
• The 3-ton scissor jack can be used as a robust replacement jack or as an additional multipurpose jack that can be stored in your car's trunk.
• With gears, the scissor jack can be expanded from 90 mm (closed position) to 360 mm to lift most vehicles.
• The extra-wide base allows easy positioning and the free handle ensures quick response and speed on site when you need it.
• Product features
• Minimum height: 90 mm
• Maximum height: 360 mm
• Lifting capacity: 3T
• Color: Black
• Material: Steel
• Scope: Suitable for small and medium-sized vehicles. For example: cars, Buick, Santana, Vietnam and other vehicles.

Package includes

• Scissor jack * 1
• Hex key * 1
• WARNING
• 1. Study, understand and follow all instructions before operating this device.
• 2. Do not exceed the rated capacity as indicated by the height/capacity curve. (See below)
• 3. Use only on hard surfaces
• 4. Use only for emergency tire changes
• 5. Never get under the vehicle when it is supported by the jack
• 6. Activate the hazard warning lights, turn off the ignition, set the parking brake, and move the automatic gear selector to Park. In case of manual transmission, move the gear selector to reverse. In addition, the wheel diagonally opposite the raised wheel must be chocked in both directions.
• 7. Lift only at areas of the vehicle as specified by the vehicle manufacturer
• 8. Follow the tire change procedure according to the vehicle manufacturer's owner's manual
• 9. No modifications are made to this product
• 10. Failure to heed these messages may result in injury and/or property damage
• HEIGHT/CAPACITY CURVE
• This device is designed to withstand the following loads at these specified heights. DO NOT exceed the rated capacity for each position.
• BEFORE USE
• 1. Before each use, check for unusual conditions such as cracked welds, leaks, damaged, loose, or missing parts
• 2. Inspect the jack immediately if it is suspected that the lift has been subjected to unusual load or impact
• 3. If the jack is found to be damaged, it should be removed from service until properly repaired
• OPERATING INSTRUCTIONS
• 1. Insert the jack handle into the hole of the handle socket
• 2. Make sure the saddle is properly positioned. To avoid damage to the jack, do not move the jack while the handle is in the socket.
• 3. To raise the load, hold the front part of the handle with one hand and turn the back and the handle clockwise with the other hand.
• 4. To lower the load, hold the front part of the handle with one hand and slowly turn the handle counterclockwise with the other hand.
• CARE AND MAINTENANCE
• 1. When the jack is not in use, the lever arm should be fully lowered.
• 2. Always keep the jack clean and keep the screw and bearings well lubricated.
• 3. Store the handle carefully.

Note

Please check before purchase whether the product is suitable for your application, vehicle model, and workshop requirements.