Product Overview
3T Auto Scissor Jack, automatic emergency crank lift stand for SUV vehicles is a workshop product for tire service & lifting technology. It is suitable for professional maintenance, service and repair work in garage, workshop and vehicle service.
Key Features
- For tire service and lifting technology
- Suitable for workshop, garage and mobile use
- Set version with multiple components
Technical Data & Product Details
Product Details
- 3T Auto Scissor Jack, Automatic Emergency Crank Lift Stand for SUV Vehicles
- Product Descriptions
- The 3-ton scissor jack can be used as a robust replacement jack or as an additional multi-purpose jack that can be stored in your car's trunk
- With gears, the scissor jack can be extended from 90 mm (closed position) to 360 mm to lift most vehicles
- The extra-wide base allows easy positioning and the free handle ensures quick response and speed on the spot when you need it
- Product Features
- Minimum height: 90 mm
- Maximum height: 360 mm
- Lifting capacity: 3T
- Color: Black
- Material: Steel
- Scope of application: Suitable for small and medium-sized vehicles. For example: cars, Buick, Santana, Vietnam and other vehicles
Package Contents
- Scissor jack * 1
- Hex key * 1
- WARNING
- 1. Study, understand and follow all instructions before operating this device
- 2. Do not exceed the rated capacity as indicated by the height/capacity curve. (See below)
- 3. Use only on hard surfaces
- 4. Use only for emergency tire changing
- 5. Never get under the vehicle when it is supported by the jack
- 6. Activate the hazard warning lights, turn off the ignition, apply the parking brake and move the automatic gear selector to Park. In case of manual transmission, move the gear selector to reverse. Additionally, the wheel diagonally opposite the lifted wheel must be chocked in both directions.
- 7. Lift only at areas of the vehicle as specified by the vehicle manufacturer
- 8. Follow the tire changing procedure according to the vehicle manufacturer's instruction manual
- 9. No modifications are made to this product
- 10. Failure to heed these messages may result in injury and/or property damage
- HEIGHT/CAPACITY CURVE
- This device is designed to withstand the following loads at these specified heights. DO NOT exceed the rated capacity for each position
- BEFORE USE
- 1. Check before each use for unusual conditions such as cracked welds, leaks, damaged, loose or missing parts
- 2. Inspect the jack immediately if it is suspected that the lift has been subjected to an abnormal load or shock
- 3. If the jack is found to be damaged, it should be removed from service until properly repaired
- OPERATING INSTRUCTIONS
- 1. Insert the jack handle into the hole of the handle socket
- 2. Make sure the saddle is properly positioned. To avoid damage to the jack, do not move the jack while the handle is intact in the socket
- 3. To raise the load, hold the front part of the handle with one hand and with the other hand turn the rear and the handle clockwise
- 4. To lower the load, hold the front part of the handle with one hand and with the other hand slowly turn the handle counterclockwise
- CARE AND MAINTENANCE
- 1. When the jack is not in use, the lever arm should be fully down
- 2. Keep the jack clean and keep the screw and bearings well lubricated
- 3. Store the handle carefully
Note
Please check before purchase whether the product is suitable for your application, your vehicle model and your workshop requirements.
