AUTOOL SDT205S Auto Smoke Leak Detector Pipe Leak Locator Automotive EVAP System Smoke Leakage Analyzer...

Product Overview

The AUTOOL SDT205S Auto Smoke Leak Detector Pipe Leak Locator Automotive EVAP System Smoke Leak Analyzer... is a workshop product for professional use in garages, workshops and vehicle service.

Key Features

• Set version with multiple components

Technical Data & Product Details

Product Details

• AUTOOL SDT205S Auto Smoke Leak Detector Pipe Leak Locator Automotive EVAP System Smoke Leak Analyzer Detector Diagnostic Tool
• How do you perform a leak test?
• 1. For the first time, fill the detector with 10ml of baby oil. Open the engine cover and hang the detector in the cover.
• 2. Disconnect the pipe that needs to be connected to the detector.
• 3. Connect the detector to a DC12V battery, turn on the power switch, and the detector starts working.
• 4. In about 30 seconds the pipe will be filled with smoke. Check the leak points. Please use a headlamp if needed.
• Autool sdt 205s auto smoke leak detector features
• 1. [Wide range of applications]: for detecting leakage of piping systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. Suitable for all car models.
• 2. [Powerful and easy to use]: The Autool SDT205S has its own air pump, without relying on other machines and manometers with precise scales. Simply connect the detector to a DC12V battery, it can output thick smoke within 30s after power-on.
• 3. [Advanced technology]: It works on the EVAP system. (With another version specifically developed for EVAP systems). Equipped with two flow meters for accurate data display and independently controlled air mode and smoke mode.
• 4. [Overheating & Frost protection]: This smoke detector has intelligent protection when it exceeds the working limit, such as over 75°C, it automatically cuts off the power supply to ensure the safety of the operator and the device.
• Caution
• 1. When using this Autool SDT205S auto smoke leak detector for the first time, fill with 10ml of oil. Please be careful not to exceed this amount.
• 2. The test liquid: both liquid paraffin and baby oil are fine.
• 3. Fresh oil can only be filled when the smoke becomes thin, and it cannot be filled more than 20ml each time.
• 4. Before filling fresh oil, please pour out the remaining oil in the detector and replace the detector oil regularly.
• 5. During the process of leak detection, please keep away from smoke-sensitive parts.
• 6. Do not run the detector continuously for more than 8 minutes. It needs interval rest.
• 7. The detector has intelligent protection. When it exceeds the working limit, such as over 75°C, it automatically switches off the power. In this case, please operate it later.
• 8. The round part of this detector has temperature, please be careful to avoid burns.
• 9. If the test pipe needs to be separated in the middle, please secure the other side with a rubber stopper.
• Packaging list
• 1pc * Autool SDT205S auto smoke leak detector main unit
• 1pc * Hook (tighten with hand nuts)
• 1pc * Rubber connecting parts
• 1 set * Hard rubber stoppers (with serial specification)
• 1 set * Soft rubber stoppers (with serial specification)

Note

Please check before purchasing whether the product is suitable for your application, vehicle model and workshop requirements.

Product images