Vehicle Compatibility
Vehicle brands: Audi, Volkswagen
Vehicle models: Passat, Golf, Tiguan, Touran, Jetta, Sharan, Touareg
Trunk handle camera for various VW models and Audi (model not specified)
Product Details and Technical Data
- Specification
- Image sensors: 1/3" Color SONY CCD
- TV system: NTSC/PAL (NTSC is default)
- Effective pixels: 728 x 582 / 728 x 512
- Capture area (mm): 3.3 x 2.6
- Resolution: 420 TV lines
- Minimum illumination: <0.1 Lux / F1.2
- Horizontal sync frequency: 15.625 kHz
- Vertical sync frequency: 50 Hz
- Video output: 75 Ohm
- Gamma value: 0.45
- AGC: Auto
- BLC: Auto
- Night vision: Yes
- IP rating: IP66
- Signal-to-noise ratio: > 48 dB
- Lens: F=1.6
- Viewing angle: 170° (diagonal)
- Current consumption: 85–115 mA
- Power supply: 12 V DC
- Operating temperature: –20 to +75 °C (max. 95% relative humidity)
- Storage temperature: –40 to +85 °C (max. 95% relative humidity)
- Installation
- 1. Install the camera in the license plate area of your car.
- 2. Adjust the camera lens to the best position.
- 3. Connect the power cable (red and black) to the power cables of your car's reversing lights.
- 4. Connect the video output (yellow cable) to the monitor.
- Note on the TV system of the reversing camera:
- Generally, most monitors support both NTSC and PAL TV systems. Therefore, it does not matter whether it is a PAL camera or an NTSC system.
- If you are unsure, please check whether your monitor supports both NTSC and PAL. If your monitor only supports one of the systems, please leave us a message within one working day after payment with the desired TV system.
- Package contents
- 1x CCD car reversing camera
- 1x 6 m video cable
- 1x power cable
